1. Packages
  2. Checkpoint Provider
  3. API Docs
  4. ManagementCommandSetGlobalProperties
checkpoint 2.9.0 published on Monday, Apr 14, 2025 by checkpointsw

checkpoint.ManagementCommandSetGlobalProperties

Explore with Pulumi AI

Create ManagementCommandSetGlobalProperties Resource

Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

Constructor syntax

new ManagementCommandSetGlobalProperties(name: string, args?: ManagementCommandSetGlobalPropertiesArgs, opts?: CustomResourceOptions);
@overload
def ManagementCommandSetGlobalProperties(resource_name: str,
                                         args: Optional[ManagementCommandSetGlobalPropertiesArgs] = None,
                                         opts: Optional[ResourceOptions] = None)

@overload
def ManagementCommandSetGlobalProperties(resource_name: str,
                                         opts: Optional[ResourceOptions] = None,
                                         advanced_conf: Optional[Mapping[str, str]] = None,
                                         allow_remote_registration_of_opsec_products: Optional[bool] = None,
                                         authentication: Optional[Mapping[str, str]] = None,
                                         carrier_security: Optional[Mapping[str, str]] = None,
                                         connect_control: Optional[Mapping[str, str]] = None,
                                         data_access_control: Optional[Mapping[str, str]] = None,
                                         domains_to_processes: Optional[Sequence[str]] = None,
                                         firewall: Optional[Mapping[str, str]] = None,
                                         hit_count: Optional[Mapping[str, str]] = None,
                                         ignore_errors: Optional[bool] = None,
                                         ignore_warnings: Optional[bool] = None,
                                         log_and_alert: Optional[Mapping[str, str]] = None,
                                         management_command_set_global_properties_id: Optional[str] = None,
                                         nat: Optional[Mapping[str, str]] = None,
                                         non_unique_ip_address_ranges: Optional[Sequence[ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs]] = None,
                                         num_spoofing_errs_that_trigger_brute_force: Optional[float] = None,
                                         proxy: Optional[Mapping[str, str]] = None,
                                         qos: Optional[Mapping[str, str]] = None,
                                         remote_access: Optional[Mapping[str, str]] = None,
                                         stateful_inspection: Optional[Mapping[str, str]] = None,
                                         user_accounts: Optional[Mapping[str, str]] = None,
                                         user_authority: Optional[Mapping[str, str]] = None,
                                         user_check: Optional[Mapping[str, str]] = None,
                                         user_directory: Optional[Mapping[str, str]] = None,
                                         vpn: Optional[Mapping[str, str]] = None)
func NewManagementCommandSetGlobalProperties(ctx *Context, name string, args *ManagementCommandSetGlobalPropertiesArgs, opts ...ResourceOption) (*ManagementCommandSetGlobalProperties, error)
public ManagementCommandSetGlobalProperties(string name, ManagementCommandSetGlobalPropertiesArgs? args = null, CustomResourceOptions? opts = null)
public ManagementCommandSetGlobalProperties(String name, ManagementCommandSetGlobalPropertiesArgs args)
public ManagementCommandSetGlobalProperties(String name, ManagementCommandSetGlobalPropertiesArgs args, CustomResourceOptions options)
type: checkpoint:ManagementCommandSetGlobalProperties
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

Parameters

name This property is required. string
The unique name of the resource.
args ManagementCommandSetGlobalPropertiesArgs
The arguments to resource properties.
opts CustomResourceOptions
Bag of options to control resource's behavior.
resource_name This property is required. str
The unique name of the resource.
args ManagementCommandSetGlobalPropertiesArgs
The arguments to resource properties.
opts ResourceOptions
Bag of options to control resource's behavior.
ctx Context
Context object for the current deployment.
name This property is required. string
The unique name of the resource.
args ManagementCommandSetGlobalPropertiesArgs
The arguments to resource properties.
opts ResourceOption
Bag of options to control resource's behavior.
name This property is required. string
The unique name of the resource.
args ManagementCommandSetGlobalPropertiesArgs
The arguments to resource properties.
opts CustomResourceOptions
Bag of options to control resource's behavior.
name This property is required. String
The unique name of the resource.
args This property is required. ManagementCommandSetGlobalPropertiesArgs
The arguments to resource properties.
options CustomResourceOptions
Bag of options to control resource's behavior.

Constructor example

The following reference example uses placeholder values for all input properties.

var managementCommandSetGlobalPropertiesResource = new Checkpoint.ManagementCommandSetGlobalProperties("managementCommandSetGlobalPropertiesResource", new()
{
    AdvancedConf = 
    {
        { "string", "string" },
    },
    AllowRemoteRegistrationOfOpsecProducts = false,
    Authentication = 
    {
        { "string", "string" },
    },
    CarrierSecurity = 
    {
        { "string", "string" },
    },
    ConnectControl = 
    {
        { "string", "string" },
    },
    DataAccessControl = 
    {
        { "string", "string" },
    },
    DomainsToProcesses = new[]
    {
        "string",
    },
    Firewall = 
    {
        { "string", "string" },
    },
    HitCount = 
    {
        { "string", "string" },
    },
    IgnoreErrors = false,
    IgnoreWarnings = false,
    LogAndAlert = 
    {
        { "string", "string" },
    },
    ManagementCommandSetGlobalPropertiesId = "string",
    Nat = 
    {
        { "string", "string" },
    },
    NonUniqueIpAddressRanges = new[]
    {
        new Checkpoint.Inputs.ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs
        {
            AddressType = "string",
            FirstIpv4Address = "string",
            FirstIpv6Address = "string",
            LastIpv4Address = "string",
            LastIpv6Address = "string",
        },
    },
    NumSpoofingErrsThatTriggerBruteForce = 0,
    Proxy = 
    {
        { "string", "string" },
    },
    Qos = 
    {
        { "string", "string" },
    },
    RemoteAccess = 
    {
        { "string", "string" },
    },
    StatefulInspection = 
    {
        { "string", "string" },
    },
    UserAccounts = 
    {
        { "string", "string" },
    },
    UserAuthority = 
    {
        { "string", "string" },
    },
    UserCheck = 
    {
        { "string", "string" },
    },
    UserDirectory = 
    {
        { "string", "string" },
    },
    Vpn = 
    {
        { "string", "string" },
    },
});
Copy
example, err := checkpoint.NewManagementCommandSetGlobalProperties(ctx, "managementCommandSetGlobalPropertiesResource", &checkpoint.ManagementCommandSetGlobalPropertiesArgs{
AdvancedConf: pulumi.StringMap{
"string": pulumi.String("string"),
},
AllowRemoteRegistrationOfOpsecProducts: pulumi.Bool(false),
Authentication: pulumi.StringMap{
"string": pulumi.String("string"),
},
CarrierSecurity: pulumi.StringMap{
"string": pulumi.String("string"),
},
ConnectControl: pulumi.StringMap{
"string": pulumi.String("string"),
},
DataAccessControl: pulumi.StringMap{
"string": pulumi.String("string"),
},
DomainsToProcesses: pulumi.StringArray{
pulumi.String("string"),
},
Firewall: pulumi.StringMap{
"string": pulumi.String("string"),
},
HitCount: pulumi.StringMap{
"string": pulumi.String("string"),
},
IgnoreErrors: pulumi.Bool(false),
IgnoreWarnings: pulumi.Bool(false),
LogAndAlert: pulumi.StringMap{
"string": pulumi.String("string"),
},
ManagementCommandSetGlobalPropertiesId: pulumi.String("string"),
Nat: pulumi.StringMap{
"string": pulumi.String("string"),
},
NonUniqueIpAddressRanges: .ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArray{
&.ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs{
AddressType: pulumi.String("string"),
FirstIpv4Address: pulumi.String("string"),
FirstIpv6Address: pulumi.String("string"),
LastIpv4Address: pulumi.String("string"),
LastIpv6Address: pulumi.String("string"),
},
},
NumSpoofingErrsThatTriggerBruteForce: pulumi.Float64(0),
Proxy: pulumi.StringMap{
"string": pulumi.String("string"),
},
Qos: pulumi.StringMap{
"string": pulumi.String("string"),
},
RemoteAccess: pulumi.StringMap{
"string": pulumi.String("string"),
},
StatefulInspection: pulumi.StringMap{
"string": pulumi.String("string"),
},
UserAccounts: pulumi.StringMap{
"string": pulumi.String("string"),
},
UserAuthority: pulumi.StringMap{
"string": pulumi.String("string"),
},
UserCheck: pulumi.StringMap{
"string": pulumi.String("string"),
},
UserDirectory: pulumi.StringMap{
"string": pulumi.String("string"),
},
Vpn: pulumi.StringMap{
"string": pulumi.String("string"),
},
})
Copy
var managementCommandSetGlobalPropertiesResource = new ManagementCommandSetGlobalProperties("managementCommandSetGlobalPropertiesResource", ManagementCommandSetGlobalPropertiesArgs.builder()
    .advancedConf(Map.of("string", "string"))
    .allowRemoteRegistrationOfOpsecProducts(false)
    .authentication(Map.of("string", "string"))
    .carrierSecurity(Map.of("string", "string"))
    .connectControl(Map.of("string", "string"))
    .dataAccessControl(Map.of("string", "string"))
    .domainsToProcesses("string")
    .firewall(Map.of("string", "string"))
    .hitCount(Map.of("string", "string"))
    .ignoreErrors(false)
    .ignoreWarnings(false)
    .logAndAlert(Map.of("string", "string"))
    .managementCommandSetGlobalPropertiesId("string")
    .nat(Map.of("string", "string"))
    .nonUniqueIpAddressRanges(ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs.builder()
        .addressType("string")
        .firstIpv4Address("string")
        .firstIpv6Address("string")
        .lastIpv4Address("string")
        .lastIpv6Address("string")
        .build())
    .numSpoofingErrsThatTriggerBruteForce(0)
    .proxy(Map.of("string", "string"))
    .qos(Map.of("string", "string"))
    .remoteAccess(Map.of("string", "string"))
    .statefulInspection(Map.of("string", "string"))
    .userAccounts(Map.of("string", "string"))
    .userAuthority(Map.of("string", "string"))
    .userCheck(Map.of("string", "string"))
    .userDirectory(Map.of("string", "string"))
    .vpn(Map.of("string", "string"))
    .build());
Copy
management_command_set_global_properties_resource = checkpoint.ManagementCommandSetGlobalProperties("managementCommandSetGlobalPropertiesResource",
    advanced_conf={
        "string": "string",
    },
    allow_remote_registration_of_opsec_products=False,
    authentication={
        "string": "string",
    },
    carrier_security={
        "string": "string",
    },
    connect_control={
        "string": "string",
    },
    data_access_control={
        "string": "string",
    },
    domains_to_processes=["string"],
    firewall={
        "string": "string",
    },
    hit_count={
        "string": "string",
    },
    ignore_errors=False,
    ignore_warnings=False,
    log_and_alert={
        "string": "string",
    },
    management_command_set_global_properties_id="string",
    nat={
        "string": "string",
    },
    non_unique_ip_address_ranges=[{
        "address_type": "string",
        "first_ipv4_address": "string",
        "first_ipv6_address": "string",
        "last_ipv4_address": "string",
        "last_ipv6_address": "string",
    }],
    num_spoofing_errs_that_trigger_brute_force=0,
    proxy={
        "string": "string",
    },
    qos={
        "string": "string",
    },
    remote_access={
        "string": "string",
    },
    stateful_inspection={
        "string": "string",
    },
    user_accounts={
        "string": "string",
    },
    user_authority={
        "string": "string",
    },
    user_check={
        "string": "string",
    },
    user_directory={
        "string": "string",
    },
    vpn={
        "string": "string",
    })
Copy
const managementCommandSetGlobalPropertiesResource = new checkpoint.ManagementCommandSetGlobalProperties("managementCommandSetGlobalPropertiesResource", {
    advancedConf: {
        string: "string",
    },
    allowRemoteRegistrationOfOpsecProducts: false,
    authentication: {
        string: "string",
    },
    carrierSecurity: {
        string: "string",
    },
    connectControl: {
        string: "string",
    },
    dataAccessControl: {
        string: "string",
    },
    domainsToProcesses: ["string"],
    firewall: {
        string: "string",
    },
    hitCount: {
        string: "string",
    },
    ignoreErrors: false,
    ignoreWarnings: false,
    logAndAlert: {
        string: "string",
    },
    managementCommandSetGlobalPropertiesId: "string",
    nat: {
        string: "string",
    },
    nonUniqueIpAddressRanges: [{
        addressType: "string",
        firstIpv4Address: "string",
        firstIpv6Address: "string",
        lastIpv4Address: "string",
        lastIpv6Address: "string",
    }],
    numSpoofingErrsThatTriggerBruteForce: 0,
    proxy: {
        string: "string",
    },
    qos: {
        string: "string",
    },
    remoteAccess: {
        string: "string",
    },
    statefulInspection: {
        string: "string",
    },
    userAccounts: {
        string: "string",
    },
    userAuthority: {
        string: "string",
    },
    userCheck: {
        string: "string",
    },
    userDirectory: {
        string: "string",
    },
    vpn: {
        string: "string",
    },
});
Copy
type: checkpoint:ManagementCommandSetGlobalProperties
properties:
    advancedConf:
        string: string
    allowRemoteRegistrationOfOpsecProducts: false
    authentication:
        string: string
    carrierSecurity:
        string: string
    connectControl:
        string: string
    dataAccessControl:
        string: string
    domainsToProcesses:
        - string
    firewall:
        string: string
    hitCount:
        string: string
    ignoreErrors: false
    ignoreWarnings: false
    logAndAlert:
        string: string
    managementCommandSetGlobalPropertiesId: string
    nat:
        string: string
    nonUniqueIpAddressRanges:
        - addressType: string
          firstIpv4Address: string
          firstIpv6Address: string
          lastIpv4Address: string
          lastIpv6Address: string
    numSpoofingErrsThatTriggerBruteForce: 0
    proxy:
        string: string
    qos:
        string: string
    remoteAccess:
        string: string
    statefulInspection:
        string: string
    userAccounts:
        string: string
    userAuthority:
        string: string
    userCheck:
        string: string
    userDirectory:
        string: string
    vpn:
        string: string
Copy

ManagementCommandSetGlobalProperties Resource Properties

To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

Inputs

In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.

The ManagementCommandSetGlobalProperties resource accepts the following input properties:

AdvancedConf Dictionary<string, string>
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
AllowRemoteRegistrationOfOpsecProducts bool
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
Authentication Dictionary<string, string>
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
CarrierSecurity Dictionary<string, string>
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
ConnectControl Dictionary<string, string>
Configure settings that relate to ConnectControl server load balancing.
DataAccessControl Dictionary<string, string>
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
DomainsToProcesses List<string>
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
Firewall Dictionary<string, string>
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
HitCount Dictionary<string, string>
Enable the Hit Count feature that tracks the number of connections that each rule matches.
IgnoreErrors bool
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
IgnoreWarnings bool
Apply changes ignoring warnings.
LogAndAlert Dictionary<string, string>
Define system-wide logging and alerting parameters.
ManagementCommandSetGlobalPropertiesId string
Nat Dictionary<string, string>
Configure settings that apply to all NAT connections.
NonUniqueIpAddressRanges List<ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange>
Specify Non Unique IP Address Ranges.
NumSpoofingErrsThatTriggerBruteForce double
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
Proxy Dictionary<string, string>
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
Qos Dictionary<string, string>
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
RemoteAccess Dictionary<string, string>
Configure Remote Access properties.
StatefulInspection Dictionary<string, string>
Adjust Stateful Inspection parameters.
UserAccounts Dictionary<string, string>
Set the expiration for a user account and configure "about to expire" warnings.
UserAuthority Dictionary<string, string>
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
UserCheck Dictionary<string, string>
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
UserDirectory Dictionary<string, string>
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
Vpn Dictionary<string, string>
Configure settings relevant to VPN.
AdvancedConf map[string]string
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
AllowRemoteRegistrationOfOpsecProducts bool
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
Authentication map[string]string
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
CarrierSecurity map[string]string
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
ConnectControl map[string]string
Configure settings that relate to ConnectControl server load balancing.
DataAccessControl map[string]string
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
DomainsToProcesses []string
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
Firewall map[string]string
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
HitCount map[string]string
Enable the Hit Count feature that tracks the number of connections that each rule matches.
IgnoreErrors bool
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
IgnoreWarnings bool
Apply changes ignoring warnings.
LogAndAlert map[string]string
Define system-wide logging and alerting parameters.
ManagementCommandSetGlobalPropertiesId string
Nat map[string]string
Configure settings that apply to all NAT connections.
NonUniqueIpAddressRanges []ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs
Specify Non Unique IP Address Ranges.
NumSpoofingErrsThatTriggerBruteForce float64
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
Proxy map[string]string
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
Qos map[string]string
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
RemoteAccess map[string]string
Configure Remote Access properties.
StatefulInspection map[string]string
Adjust Stateful Inspection parameters.
UserAccounts map[string]string
Set the expiration for a user account and configure "about to expire" warnings.
UserAuthority map[string]string
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
UserCheck map[string]string
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
UserDirectory map[string]string
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
Vpn map[string]string
Configure settings relevant to VPN.
advancedConf Map<String,String>
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allowRemoteRegistrationOfOpsecProducts Boolean
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication Map<String,String>
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrierSecurity Map<String,String>
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connectControl Map<String,String>
Configure settings that relate to ConnectControl server load balancing.
dataAccessControl Map<String,String>
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domainsToProcesses List<String>
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall Map<String,String>
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hitCount Map<String,String>
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignoreErrors Boolean
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignoreWarnings Boolean
Apply changes ignoring warnings.
logAndAlert Map<String,String>
Define system-wide logging and alerting parameters.
managementCommandSetGlobalPropertiesId String
nat Map<String,String>
Configure settings that apply to all NAT connections.
nonUniqueIpAddressRanges List<ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange>
Specify Non Unique IP Address Ranges.
numSpoofingErrsThatTriggerBruteForce Double
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy Map<String,String>
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos Map<String,String>
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remoteAccess Map<String,String>
Configure Remote Access properties.
statefulInspection Map<String,String>
Adjust Stateful Inspection parameters.
userAccounts Map<String,String>
Set the expiration for a user account and configure "about to expire" warnings.
userAuthority Map<String,String>
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
userCheck Map<String,String>
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
userDirectory Map<String,String>
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn Map<String,String>
Configure settings relevant to VPN.
advancedConf {[key: string]: string}
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allowRemoteRegistrationOfOpsecProducts boolean
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication {[key: string]: string}
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrierSecurity {[key: string]: string}
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connectControl {[key: string]: string}
Configure settings that relate to ConnectControl server load balancing.
dataAccessControl {[key: string]: string}
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domainsToProcesses string[]
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall {[key: string]: string}
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hitCount {[key: string]: string}
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignoreErrors boolean
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignoreWarnings boolean
Apply changes ignoring warnings.
logAndAlert {[key: string]: string}
Define system-wide logging and alerting parameters.
managementCommandSetGlobalPropertiesId string
nat {[key: string]: string}
Configure settings that apply to all NAT connections.
nonUniqueIpAddressRanges ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange[]
Specify Non Unique IP Address Ranges.
numSpoofingErrsThatTriggerBruteForce number
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy {[key: string]: string}
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos {[key: string]: string}
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remoteAccess {[key: string]: string}
Configure Remote Access properties.
statefulInspection {[key: string]: string}
Adjust Stateful Inspection parameters.
userAccounts {[key: string]: string}
Set the expiration for a user account and configure "about to expire" warnings.
userAuthority {[key: string]: string}
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
userCheck {[key: string]: string}
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
userDirectory {[key: string]: string}
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn {[key: string]: string}
Configure settings relevant to VPN.
advanced_conf Mapping[str, str]
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allow_remote_registration_of_opsec_products bool
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication Mapping[str, str]
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrier_security Mapping[str, str]
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connect_control Mapping[str, str]
Configure settings that relate to ConnectControl server load balancing.
data_access_control Mapping[str, str]
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domains_to_processes Sequence[str]
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall Mapping[str, str]
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hit_count Mapping[str, str]
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignore_errors bool
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignore_warnings bool
Apply changes ignoring warnings.
log_and_alert Mapping[str, str]
Define system-wide logging and alerting parameters.
management_command_set_global_properties_id str
nat Mapping[str, str]
Configure settings that apply to all NAT connections.
non_unique_ip_address_ranges Sequence[ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs]
Specify Non Unique IP Address Ranges.
num_spoofing_errs_that_trigger_brute_force float
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy Mapping[str, str]
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos Mapping[str, str]
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remote_access Mapping[str, str]
Configure Remote Access properties.
stateful_inspection Mapping[str, str]
Adjust Stateful Inspection parameters.
user_accounts Mapping[str, str]
Set the expiration for a user account and configure "about to expire" warnings.
user_authority Mapping[str, str]
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
user_check Mapping[str, str]
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
user_directory Mapping[str, str]
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn Mapping[str, str]
Configure settings relevant to VPN.
advancedConf Map<String>
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allowRemoteRegistrationOfOpsecProducts Boolean
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication Map<String>
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrierSecurity Map<String>
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connectControl Map<String>
Configure settings that relate to ConnectControl server load balancing.
dataAccessControl Map<String>
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domainsToProcesses List<String>
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall Map<String>
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hitCount Map<String>
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignoreErrors Boolean
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignoreWarnings Boolean
Apply changes ignoring warnings.
logAndAlert Map<String>
Define system-wide logging and alerting parameters.
managementCommandSetGlobalPropertiesId String
nat Map<String>
Configure settings that apply to all NAT connections.
nonUniqueIpAddressRanges List<Property Map>
Specify Non Unique IP Address Ranges.
numSpoofingErrsThatTriggerBruteForce Number
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy Map<String>
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos Map<String>
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remoteAccess Map<String>
Configure Remote Access properties.
statefulInspection Map<String>
Adjust Stateful Inspection parameters.
userAccounts Map<String>
Set the expiration for a user account and configure "about to expire" warnings.
userAuthority Map<String>
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
userCheck Map<String>
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
userDirectory Map<String>
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn Map<String>
Configure settings relevant to VPN.

Outputs

All input properties are implicitly available as output properties. Additionally, the ManagementCommandSetGlobalProperties resource produces the following output properties:

Id string
The provider-assigned unique ID for this managed resource.
Id string
The provider-assigned unique ID for this managed resource.
id String
The provider-assigned unique ID for this managed resource.
id string
The provider-assigned unique ID for this managed resource.
id str
The provider-assigned unique ID for this managed resource.
id String
The provider-assigned unique ID for this managed resource.

Look up Existing ManagementCommandSetGlobalProperties Resource

Get an existing ManagementCommandSetGlobalProperties resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

public static get(name: string, id: Input<ID>, state?: ManagementCommandSetGlobalPropertiesState, opts?: CustomResourceOptions): ManagementCommandSetGlobalProperties
@staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        advanced_conf: Optional[Mapping[str, str]] = None,
        allow_remote_registration_of_opsec_products: Optional[bool] = None,
        authentication: Optional[Mapping[str, str]] = None,
        carrier_security: Optional[Mapping[str, str]] = None,
        connect_control: Optional[Mapping[str, str]] = None,
        data_access_control: Optional[Mapping[str, str]] = None,
        domains_to_processes: Optional[Sequence[str]] = None,
        firewall: Optional[Mapping[str, str]] = None,
        hit_count: Optional[Mapping[str, str]] = None,
        ignore_errors: Optional[bool] = None,
        ignore_warnings: Optional[bool] = None,
        log_and_alert: Optional[Mapping[str, str]] = None,
        management_command_set_global_properties_id: Optional[str] = None,
        nat: Optional[Mapping[str, str]] = None,
        non_unique_ip_address_ranges: Optional[Sequence[ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs]] = None,
        num_spoofing_errs_that_trigger_brute_force: Optional[float] = None,
        proxy: Optional[Mapping[str, str]] = None,
        qos: Optional[Mapping[str, str]] = None,
        remote_access: Optional[Mapping[str, str]] = None,
        stateful_inspection: Optional[Mapping[str, str]] = None,
        user_accounts: Optional[Mapping[str, str]] = None,
        user_authority: Optional[Mapping[str, str]] = None,
        user_check: Optional[Mapping[str, str]] = None,
        user_directory: Optional[Mapping[str, str]] = None,
        vpn: Optional[Mapping[str, str]] = None) -> ManagementCommandSetGlobalProperties
func GetManagementCommandSetGlobalProperties(ctx *Context, name string, id IDInput, state *ManagementCommandSetGlobalPropertiesState, opts ...ResourceOption) (*ManagementCommandSetGlobalProperties, error)
public static ManagementCommandSetGlobalProperties Get(string name, Input<string> id, ManagementCommandSetGlobalPropertiesState? state, CustomResourceOptions? opts = null)
public static ManagementCommandSetGlobalProperties get(String name, Output<String> id, ManagementCommandSetGlobalPropertiesState state, CustomResourceOptions options)
resources:  _:    type: checkpoint:ManagementCommandSetGlobalProperties    get:      id: ${id}
name This property is required.
The unique name of the resulting resource.
id This property is required.
The unique provider ID of the resource to lookup.
state
Any extra arguments used during the lookup.
opts
A bag of options that control this resource's behavior.
resource_name This property is required.
The unique name of the resulting resource.
id This property is required.
The unique provider ID of the resource to lookup.
name This property is required.
The unique name of the resulting resource.
id This property is required.
The unique provider ID of the resource to lookup.
state
Any extra arguments used during the lookup.
opts
A bag of options that control this resource's behavior.
name This property is required.
The unique name of the resulting resource.
id This property is required.
The unique provider ID of the resource to lookup.
state
Any extra arguments used during the lookup.
opts
A bag of options that control this resource's behavior.
name This property is required.
The unique name of the resulting resource.
id This property is required.
The unique provider ID of the resource to lookup.
state
Any extra arguments used during the lookup.
opts
A bag of options that control this resource's behavior.
The following state arguments are supported:
AdvancedConf Dictionary<string, string>
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
AllowRemoteRegistrationOfOpsecProducts bool
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
Authentication Dictionary<string, string>
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
CarrierSecurity Dictionary<string, string>
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
ConnectControl Dictionary<string, string>
Configure settings that relate to ConnectControl server load balancing.
DataAccessControl Dictionary<string, string>
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
DomainsToProcesses List<string>
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
Firewall Dictionary<string, string>
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
HitCount Dictionary<string, string>
Enable the Hit Count feature that tracks the number of connections that each rule matches.
IgnoreErrors bool
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
IgnoreWarnings bool
Apply changes ignoring warnings.
LogAndAlert Dictionary<string, string>
Define system-wide logging and alerting parameters.
ManagementCommandSetGlobalPropertiesId string
Nat Dictionary<string, string>
Configure settings that apply to all NAT connections.
NonUniqueIpAddressRanges List<ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange>
Specify Non Unique IP Address Ranges.
NumSpoofingErrsThatTriggerBruteForce double
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
Proxy Dictionary<string, string>
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
Qos Dictionary<string, string>
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
RemoteAccess Dictionary<string, string>
Configure Remote Access properties.
StatefulInspection Dictionary<string, string>
Adjust Stateful Inspection parameters.
UserAccounts Dictionary<string, string>
Set the expiration for a user account and configure "about to expire" warnings.
UserAuthority Dictionary<string, string>
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
UserCheck Dictionary<string, string>
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
UserDirectory Dictionary<string, string>
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
Vpn Dictionary<string, string>
Configure settings relevant to VPN.
AdvancedConf map[string]string
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
AllowRemoteRegistrationOfOpsecProducts bool
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
Authentication map[string]string
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
CarrierSecurity map[string]string
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
ConnectControl map[string]string
Configure settings that relate to ConnectControl server load balancing.
DataAccessControl map[string]string
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
DomainsToProcesses []string
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
Firewall map[string]string
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
HitCount map[string]string
Enable the Hit Count feature that tracks the number of connections that each rule matches.
IgnoreErrors bool
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
IgnoreWarnings bool
Apply changes ignoring warnings.
LogAndAlert map[string]string
Define system-wide logging and alerting parameters.
ManagementCommandSetGlobalPropertiesId string
Nat map[string]string
Configure settings that apply to all NAT connections.
NonUniqueIpAddressRanges []ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs
Specify Non Unique IP Address Ranges.
NumSpoofingErrsThatTriggerBruteForce float64
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
Proxy map[string]string
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
Qos map[string]string
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
RemoteAccess map[string]string
Configure Remote Access properties.
StatefulInspection map[string]string
Adjust Stateful Inspection parameters.
UserAccounts map[string]string
Set the expiration for a user account and configure "about to expire" warnings.
UserAuthority map[string]string
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
UserCheck map[string]string
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
UserDirectory map[string]string
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
Vpn map[string]string
Configure settings relevant to VPN.
advancedConf Map<String,String>
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allowRemoteRegistrationOfOpsecProducts Boolean
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication Map<String,String>
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrierSecurity Map<String,String>
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connectControl Map<String,String>
Configure settings that relate to ConnectControl server load balancing.
dataAccessControl Map<String,String>
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domainsToProcesses List<String>
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall Map<String,String>
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hitCount Map<String,String>
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignoreErrors Boolean
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignoreWarnings Boolean
Apply changes ignoring warnings.
logAndAlert Map<String,String>
Define system-wide logging and alerting parameters.
managementCommandSetGlobalPropertiesId String
nat Map<String,String>
Configure settings that apply to all NAT connections.
nonUniqueIpAddressRanges List<ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange>
Specify Non Unique IP Address Ranges.
numSpoofingErrsThatTriggerBruteForce Double
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy Map<String,String>
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos Map<String,String>
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remoteAccess Map<String,String>
Configure Remote Access properties.
statefulInspection Map<String,String>
Adjust Stateful Inspection parameters.
userAccounts Map<String,String>
Set the expiration for a user account and configure "about to expire" warnings.
userAuthority Map<String,String>
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
userCheck Map<String,String>
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
userDirectory Map<String,String>
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn Map<String,String>
Configure settings relevant to VPN.
advancedConf {[key: string]: string}
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allowRemoteRegistrationOfOpsecProducts boolean
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication {[key: string]: string}
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrierSecurity {[key: string]: string}
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connectControl {[key: string]: string}
Configure settings that relate to ConnectControl server load balancing.
dataAccessControl {[key: string]: string}
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domainsToProcesses string[]
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall {[key: string]: string}
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hitCount {[key: string]: string}
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignoreErrors boolean
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignoreWarnings boolean
Apply changes ignoring warnings.
logAndAlert {[key: string]: string}
Define system-wide logging and alerting parameters.
managementCommandSetGlobalPropertiesId string
nat {[key: string]: string}
Configure settings that apply to all NAT connections.
nonUniqueIpAddressRanges ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange[]
Specify Non Unique IP Address Ranges.
numSpoofingErrsThatTriggerBruteForce number
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy {[key: string]: string}
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos {[key: string]: string}
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remoteAccess {[key: string]: string}
Configure Remote Access properties.
statefulInspection {[key: string]: string}
Adjust Stateful Inspection parameters.
userAccounts {[key: string]: string}
Set the expiration for a user account and configure "about to expire" warnings.
userAuthority {[key: string]: string}
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
userCheck {[key: string]: string}
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
userDirectory {[key: string]: string}
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn {[key: string]: string}
Configure settings relevant to VPN.
advanced_conf Mapping[str, str]
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allow_remote_registration_of_opsec_products bool
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication Mapping[str, str]
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrier_security Mapping[str, str]
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connect_control Mapping[str, str]
Configure settings that relate to ConnectControl server load balancing.
data_access_control Mapping[str, str]
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domains_to_processes Sequence[str]
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall Mapping[str, str]
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hit_count Mapping[str, str]
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignore_errors bool
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignore_warnings bool
Apply changes ignoring warnings.
log_and_alert Mapping[str, str]
Define system-wide logging and alerting parameters.
management_command_set_global_properties_id str
nat Mapping[str, str]
Configure settings that apply to all NAT connections.
non_unique_ip_address_ranges Sequence[ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs]
Specify Non Unique IP Address Ranges.
num_spoofing_errs_that_trigger_brute_force float
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy Mapping[str, str]
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos Mapping[str, str]
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remote_access Mapping[str, str]
Configure Remote Access properties.
stateful_inspection Mapping[str, str]
Adjust Stateful Inspection parameters.
user_accounts Mapping[str, str]
Set the expiration for a user account and configure "about to expire" warnings.
user_authority Mapping[str, str]
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
user_check Mapping[str, str]
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
user_directory Mapping[str, str]
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn Mapping[str, str]
Configure settings relevant to VPN.
advancedConf Map<String>
Configure advanced global attributes. It's highly recommended to consult with Check Point's Technical Support before modifying these values.
allowRemoteRegistrationOfOpsecProducts Boolean
After installing an OPSEC application, the remote administration (RA) utility enables an OPSEC product to finish registering itself without having to access the SmartConsole. If set to true, any host including the application host can run the utility. Otherwise, the RA utility can only be run from the Security Management host.
authentication Map<String>
Define Authentication properties that are common to all users and to the various ways that the Check Point Security Gateway asks for passwords (User, Client and Session Authentication).
carrierSecurity Map<String>
Specify system-wide properties. Select GTP intra tunnel inspection options, including anti-spoofing; tracking and logging options, and integrity tests.
connectControl Map<String>
Configure settings that relate to ConnectControl server load balancing.
dataAccessControl Map<String>
Configure automatic downloads from Check Point and anonymously share product data. Options selected here apply to all Security Gateways, Clusters and VSX devices managed by this management server.
domainsToProcesses List<String>
Indicates which domains to process the commands on. It cannot be used with the details-level full, must be run from the System Domain only and with ignore-warnings true. Valid values are: CURRENT_DOMAIN, ALL_DOMAINS_ON_THIS_SERVER.
firewall Map<String>
Add implied rules to or remove them from the Firewall Rule Base. Determine the position of the implied rules in the Rule Base, and whether or not to log them.
hitCount Map<String>
Enable the Hit Count feature that tracks the number of connections that each rule matches.
ignoreErrors Boolean
Apply changes ignoring errors. You won't be able to publish such a changes. If ignore-warnings flag was omitted - warnings will also be ignored.
ignoreWarnings Boolean
Apply changes ignoring warnings.
logAndAlert Map<String>
Define system-wide logging and alerting parameters.
managementCommandSetGlobalPropertiesId String
nat Map<String>
Configure settings that apply to all NAT connections.
nonUniqueIpAddressRanges List<Property Map>
Specify Non Unique IP Address Ranges.
numSpoofingErrsThatTriggerBruteForce Number
Indicates how many incorrectly signed packets will be tolerated before assuming that there is an attack on the packet tagging and revoking the client's key.
proxy Map<String>
Select whether a proxy server is used when servers, gateways, or clients need to access the internet for certain Check Point features and set the default proxy server that will be used.
qos Map<String>
Define the general parameters of Quality of Service (QoS) and apply them to QoS rules.
remoteAccess Map<String>
Configure Remote Access properties.
statefulInspection Map<String>
Adjust Stateful Inspection parameters.
userAccounts Map<String>
Set the expiration for a user account and configure "about to expire" warnings.
userAuthority Map<String>
Decide whether to display and access the WebAccess rule base. This policy defines which users (that is, which Windows Domains) have access to the internal sites of the organization.
userCheck Map<String>
Set a language for the UserCheck message if the language setting in the user's browser cannot be determined.
userDirectory Map<String>
User can enable LDAP User Directory as well as specify global parameters for LDAP. If LDAP User Directory is enabled, this means that users are managed on an external LDAP server and not on the internal Check Point Security Gateway users databases.
vpn Map<String>
Configure settings relevant to VPN.

Supporting Types

ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRange
, ManagementCommandSetGlobalPropertiesNonUniqueIpAddressRangeArgs

AddressType string
The type of the IP Address.
FirstIpv4Address string
The first IPV4 Address in the range.
FirstIpv6Address string
The first IPV6 Address in the range.
LastIpv4Address string
The last IPV4 Address in the range.
LastIpv6Address string
The last IPV6 Address in the range.
AddressType string
The type of the IP Address.
FirstIpv4Address string
The first IPV4 Address in the range.
FirstIpv6Address string
The first IPV6 Address in the range.
LastIpv4Address string
The last IPV4 Address in the range.
LastIpv6Address string
The last IPV6 Address in the range.
addressType String
The type of the IP Address.
firstIpv4Address String
The first IPV4 Address in the range.
firstIpv6Address String
The first IPV6 Address in the range.
lastIpv4Address String
The last IPV4 Address in the range.
lastIpv6Address String
The last IPV6 Address in the range.
addressType string
The type of the IP Address.
firstIpv4Address string
The first IPV4 Address in the range.
firstIpv6Address string
The first IPV6 Address in the range.
lastIpv4Address string
The last IPV4 Address in the range.
lastIpv6Address string
The last IPV6 Address in the range.
address_type str
The type of the IP Address.
first_ipv4_address str
The first IPV4 Address in the range.
first_ipv6_address str
The first IPV6 Address in the range.
last_ipv4_address str
The last IPV4 Address in the range.
last_ipv6_address str
The last IPV6 Address in the range.
addressType String
The type of the IP Address.
firstIpv4Address String
The first IPV4 Address in the range.
firstIpv6Address String
The first IPV6 Address in the range.
lastIpv4Address String
The last IPV4 Address in the range.
lastIpv6Address String
The last IPV6 Address in the range.

Package Details

Repository
checkpoint checkpointsw/terraform-provider-checkpoint
License
Notes
This Pulumi package is based on the checkpoint Terraform Provider.